Swimming Pool Help Center

How do I get started using a Salt Water Chlorinator?

How does a Salt Water Chlorinator work?

How can I test to determine the salt content of my pool?

What is a Clearwater Salt Chlorinator?

How do I know when the salt level in the pool is low?

How salty is the pool water?

What type of salt should I use?

Will I need to add salt later?

How long does a cell last?

What is the approximate cost of salt?

Why should I use a Salt Chlorinator?

How much salt has to be added every year?

How much salt will I need to add?

Where do I get the salt?

What if my salt levels are too high or too low?

How do I know what the level of salt in my pool is?

What maintenance is required to operate the Salt Water Chlorinator?

Do I still need to shock my pool?

Is this a new technology?

Will the Salt Water Chlorinator work in a pool with extremely high salt levels, for example an ocean water pool?


	It�s easy! After installing your Clearwater Chlorinator, you simply add the recommended amount of salt to your pool and choose your desired chlorine level.


	Mildly salted water passes through the electronic cell and chlorine is produced. The chlorine is released into the pool to kill bacteria, viruses and algae. A small amount of ozone is also produced to give your water that added sparkle. The chlorine then turns back to salt to be used over again.


	With test strips that measure salt content.


	It is an electronic device that turns salt into chlorine.


	There is a meter on the Salt Water Chlorinator that alerts you when the salt is low.


	The amount of salt initially required is 4,000 parts per million which is barely detectable. In comparison, a teardrop is about 7,200 ppm and the ocean is about 36,000 ppm.


	High purity salt. It should not contain iodine or any other metals. Rock, course or solar salt all work well.


	Salt is lost only through splash-out and backwashing. It is not lost through the chlorination process or evaporation. So, you�ll only have to add a small amount (probably a bag or two) each year.


	The cell life will depend on usage. It will last at least 3 years, but it may last as long as 8 years, depending on how much chlorine it produces.


	The price of salt varies from region to region. For an approximate cost use 12 cents a pound.

1) To eliminate the hassle of handling and storing chlorine. 2) Peace of Mind � Set the desired level and chlorine will continually be produced killing bacteria before it becomes a problem. 3) Easier Maintenance � Fewer fluctuations in chlorine levels mean fewer fluctuations in PH levels. This adds up to more stable, balanced water. Salt Feels Better � The human body contains salt. The salt water used in a Chlorinator is more similar to human tissue, therefore it feels better and is less irritating to the body than standard chlorinated water.


	The salt is converted to chlorine and then it reverts back to salt. Only the salt that has been lost due to splash-out of the water has to be replaced. Approximately one bag per year.


	To calculate the amount of salt required go to our site at http://www.northwestwholesale.com/pool_calculator.asp and fill out the first 3 boxes of the form. The salt required will be automatically calculated. If you do not know the cost of salt use $12.00 per hundred as a rough calculation.


	Your local pool store may carry the salt. Otherwise, it can be purchased from salt wholesalers or large building supply retailers.


	Your Clearwater Chlorinator will continue to operate. However if the salt dips below 2,500 ppm, it can be damaging to the salt cell, possibly reducing its life.


	The Clearwater Chlorinator will tell you when your salt level is too low. For precise levels you can use salt test strips, which should be available at your local pool retailer.


	The Clearwater LM Chlorinator actually cleans itself! Every 5 hours, the electric plates reverse their polarity to ensure there is no calcium build up on them.


	There is a super-chlorinate feature on the Clearwater Chlorinator; however, it is recommended that you use a liquid or granular shock when you first open your pool in order to boost your chlorine levels.


	No. Clearwater introduced this technology in Australia over 25 years ago. More than 90% of pools in Australia are now salt water pools. Clearwater Chlorinators are now sold worldwide.

As the salt level in water increases, so does the conductivity of that water. Most Salt Chlorinators will shut off when salt levels get to 5,500 ppm because with the increased conductivity, the power pack gets extremely hot, and can even cause a fire. The Clearwater Chlorinator, however, is able to pull back some voltage and release it through its heat release at the pack of the power pack. As a result, the Clearwater will work at very high salt levels, even ocean water levels (35,000 ppm).

Click to Display Catalogue Links
Customer Comments Share \| \|
In-ground Pools On-Ground Pools (New)	Above Ground Pools Wood Above Ground/Onground Pools	The Clearance Page Europe Clearance Page	Wet Deck Aquatic Access	IPG Curve Spas
Pool Pumps & Filters Cartridges Replacements		Pool Cleaners Pool Devil Surface Pool Cleaner	Quartz Patio Heater Leaf Nets, Winter & Safety Covers	Spas and Hot Tubs Spa Accessories
Pool Heaters Pool Heat Pumps	Swimming Pool Lights Fiber Optic Lighting	Slides, Boards and Steps	Turn Your Pool Into a Swim Machine	Goldline Controls
Pool Liners Pool Liner Guard & Wall Insulation	Above Ground Fencing Above Ground Steps	Accessories & Maintenance	Pool Games Sanitizing Systems (UV / Mineral)	Solar Heating Pool Solar Covers
Liquid Solar Blanket		Pool Alarms	Salt Water Chlorine Generator & Controls	Solar Cover Storage System Zeobrite Filter Media